- The Reasons Why Your Air Mattress Deflates
- How To Keep Air Mattress From Deflating
- How To Keep Air Mattress From Deflating: Effective Tips
- Final Words
The widespread air mattress phenomenon which deflates overnight remains a mystery to many consumers worldwide. You inflate your mattress and sleep comfortably only to wake up to a substantially flattened unit. Do you know how to keep air mattress from deflating?
The first time this happens, many inflatable mattress owners become visibly alarmed. You start to wonder if your mattresses are punched somehow and start looking for the affected area.
They give up more confusion after using the most advanced methods to look for around leakage without success. If you’ve been in this scenario, just know you’re not alone. But it’s quite easy to understand how to keep air mattress from deflating!
The Reasons Why Your Air Mattress Deflates
Have you ever gone to bed on a firm air mattress fully inflated and woken up on a soft, saggy mattress every morning? You ‘re not alone, well. Air loss is a common phenomenon that most of us who own or sleep on air mattresses have experienced. Let’s find out common problems deflating overnight behind air mattress.
Before you use your air bed, always read the instruction manual. Sometimes we can miss a few steps essential to the mattress’s optimal performance if we are in a hurry to inflate the mattress.
By reading the instructions thoroughly and carefully, you will maintain the air pressure inside the mattress and improve the mattress’s longevity.
Changing temperature can affect the air pressure directly in your mattress. Your air mattress may be filled to the best level by day, but the lower temperature in the evening may condense the air inside the mattress. This condensation may decrease the mattress.
You can solve this problem by keeping the room temperature at night. Put a heater in your room and ensure it is not too close to the mattress as excessive damage can be done to the mattress.
Pumping Air Loss
If you have a mattress with an external pump, you will lose some air each time you remove the pump from the mattress. This air loss can not be plugged regardless of how hard you try. The other option is to purchase a mattress with an integrated pump. Such mattresses can be used and maintained more easily.
Air mattresses are susceptible to breakage and damage. The more you use them, the more likely they are to leak. Store them carefully to prevent them from ripping or tearing. Place your air bed like a rug on a surface so it won’t damage any sharp objects on the floor.
The opening from where the air is being pumped into the column can be damaged over time. Since it is opened and closed every time to fill the air, it can get loose. Hold a check on the bubble so that you won’t lose more air each time you open it. Put the duct tape over the nozzle if it’s loosened. This prevents additional leakage.
How To Keep Air Mattress From Deflating
Naturally, air mattress manufacturers prefer not to play with scissors while in bed. Apart from physics’s normal laws, the most complaints about air columns are limp.
Certainly, some are more robust than others, for example, outdoor air mattresses, which can be placed directly on rocky soil or sharp gravel without any worries. On the other hand, some cheaper models are not really for long-term daily use and are expected to spring leaks in a few months.
This can be avoided or at least delayed by gentle handling. Avoid sharp objects close to your bed, including pets and table corners. Don’t try to force the air out and don’t over-inflate when it collapses.
The latter is not usually a problem with internal pump air mattresses, as most have pressure regulators. However, you should also be careful about straining valves and nozzles when using an external pump. Here’s how to keep air mattress from deflating!
Fold it with care.
Since this is the last step in processing this mattress, careful handling can often be ignored. This is one of the most important steps, however, and should always be done accurately to increase the lifetime of your blow-up bed.
Over time, the extension of the bed’s materials during the folding process will increase the probability of tears developing. If small holes are already appearing, incorrect folding aggravates them and increases their leakage.
In order to avoid this, follow the folding instructions in the user manual. These steps may seem tedious or ineffective, but neither are they. They are written in the instructions to keep your mattress as long as possible.
Monitor the temperature of the room.
The optimal air level inside the mattress must be maintained at all times. As mentioned before, the air in the mattress tends to condense during colder weather, and the bed deflates. When the wind is low, the bed isn’t high and is more susceptible to tears or holes.
Pay close attention to the temperature to mitigate the chances of developing trouts and tears. Check the heat when you fill-up the bed, and do your best to keep it throughout the night.
Look at your environment before your mattress blows up.
This is the necessary advice that every owner of an inflatable mattress should follow. Sadly, only a few people do so and finally avoid the consequences.
It is essential to ensure that your bedroom or area is large enough to fit your mattress’s size. The next step is to look for sharp objects around which your mattress could be punctured.
You will be surprised to know that a wholly blown mattress can easily be pierced by contact with the sharp edge of a table. If your mattress’ construction material is thin, you must be even more careful.
Inflating your mattress on a few stones can also cause an individual or multiple punching. These punctures are usually sufficient to force your mattress to leak out slowly. In most cases, they may be around for long before you even suspect that your airbed is wrong. Most punctures are usually too small unless you notice significant air leaks.
Finding a punch can be a complicated undertaking, in which most people fail. However, you should not have problems uncovering them for patching with the right techniques.
Let the material extend.
After the first few applications, the natural properties of airbeds are slightly expanding. This enables the material to cope with the fact that you will blow in and out of the air during its life.
In the first few nights, the material of a new mattress will be extended. So, it may seem like that night’s air bed has shrunk. For most air mattresses, this slope is entirely reasonable. The mattress can be inflated for two or three days without using it to stretch out before you sleep.
During the first few nights of sleep, the material naturally spreads on your brand new inflatable mattress.
A stretched surface can produce the impression of a leak since you blew only enough air to make your bed firm. You shouldn’t be alarmed to experience this. Know that the material will extend very soon to its maximum capacity so that you can start sleeping more comfortably.
How much stretching occurs in your mattress usually depends on its materials. More luxurious models with higher price tags typically have minimal extension compared to their less expensive competitors.
But what if you don’t wake up for the first few nights to a seemingly deflated air color? The trick is to completely inflate the bed for 2-3 days without having to sleep. Make sure that you don’t put extra weight on the mattress during this phase so that it can extend naturally.
How To Keep Air Mattress From Deflating: Effective Tips
Air mattresses are not always as long-lasting as their companions in spring design. They are also cheaper, more portable, and hygienic and offer adjustable rigidity, so it’s still worth taking them into account. Once you have bought one, it will last a lot longer following a few simple rules.
Purchase the mattress you need.
There are significant differences between orthopedic air mattresses, camping mattresses, and other mattresses for daily use. It takes just a few minutes to look at a few reviews and can help avoid an expensive mistake. Checking a suitable maximum weight rating is also a good idea.
Blow it up, but for the first 48 hours, don’t use it.
In particular, its seams, cells, and other components need some time to stretch into a natural position with cheaper air mattresses. Inflating a new mattress without weighing it may prevent problems during this stage.
Don’t over-inflate it.
Producers and retailers could do better to inform their customers about this risk. Even if you don’t break a seam, you ‘re going to tighten up the material and make future damage more likely.
Keep it inflated and deflate for storage when in use.
Re-inflates your mattress every night and leaves it under unnecessary pressure if it is not used. If you follow these recommendations, your bed remains airtight for a long time.
Overnight air mattresses deflate because they are not used properly. The main reason for the deflation of an air mattress is its use. A close second is excessive variations in the temperature in the bedroom. If you follow the tips above, your air mattress should not lose air, but no hole would seem to have formed. Go one by one if your air mattress continues to deflate.